|
|
The Nu-Torque Model GMN44741 corrosion-resistant hydraulic motor is specifically designed
for the marine environment. Constructed of cast nickel aluminum bronze (NAB) housings, stainless steel gears, shafts and hardware
suited for areas where corrosion resistance is required. This same selection of materials also creates a motor which may be used
where non-magnetic properties are required.
The motor is designed to meet all of the performance and connection requirements of MIL-P-18111A for manually operated hydraulic
systems such as valve actuators and water tight doors.
The motor is constructed with metal to metal mating surfaces with o-ring seals between the motor body and the front and back
castings. The shaft is sealed with a corrosion resistant mechanical shaft seal. Inlet and Outlet ports are SAE-16 (1 inch) straight
thread o-ring port configuration.
The motor is bi-directional simply by applying pressure to the desired port. The motor may be used in any position as hydraulic
fluid provides full lubrication.
MOTOR SPECIFICATIONS
| Model No. |
|
GMN44741 |
| Type |
|
Motor, Hydraulic Gear |
| Ports |
|
1", SAE-16 O-Ring |
| Operating Pressure |
|
350-750 PSI |
| Maximum Pressure |
|
900 PSI |
| Test Pressure |
|
1000 PSI |
| Output Flow |
|
5.5 Cubic Inches/Revolution |
| Output Torque |
|
30 Ft Lbs @ 350 PSI |
| Weight |
|
35 Lbs |
| Material |
|
Bronze/Stainless Steel |
| Magnetic Permeability |
|
Less than 2.0 |
|
The data and specifications in this bulletin are for information purposes only. Consult your Nu-Torque representative
for specific data.
|
